Kovessly Towel Rack Magnet – Weather-Resistant Powder-Coated Organizer for Garage Workbenches and Outdoor Kitchens
Kovessly Towel Rack Magnet – Weather-Resistant Powder-Coated Organizer for Garage Workbenches and Outdoor Kitchens
Couldn't load pickup availability
Why you'll love it
- Renter-friendly magnetic install requires no drilling, no adhesive, and leaves no glue residue or holes
- One-piece L-shape carbon steel design won't snap at the weld like cheaper competitors
- Holds up to 6 lbs of paper towels or small accessories on a single strong magnet
- Saves valuable counter and shelf space by mounting vertically or horizontally on metal appliances
- Recessed backing screws prevent scratches on fridge and appliance surfaces
- Available in multiple colors (black, white, gold, green, purple, blue, pink) to match modern kitchen and bathroom decor
Perfect for
- Mounting a paper towel roll directly on the fridge or microwave for arm's-reach access during cooking
- Replacing adhesive or drilled paper towel holders in rental properties without damaging walls
- Storing and dispensing paper towels inside an RV or camper where counter space is limited
- Hanging kitchen utensils, hats, caps, scarves, or keychains on metal surfaces like toolboxes or filing cabinets
- Organizing a pantry or garage by keeping paper towel rolls off workbenches and shelves
Seropy Magnetic Paper Towel Holder for Fridge
Product Information
Magnetic Paper Towel Holder: Unlike paper towel holder under cabinet, adhesive paper towel holder wall mount, or toilet paper holder adhesive, our kitchen towel holder with strong magnetic backing always attaches firmly on metal surfaces and easy to remove for new position without leaving drilling holes or glue residue. The one-piece paper towel bar design will not break like other hand towel holder with weak welding. Perfect pantry organizer for garage storage and fridge organizers and storage.
Strong Magnet and No Drilling: Compared to traditional paper towel dispenser wall mount, countertop paper towel holder, adhesive bathroom towel holder or automatic paper towel dispenser, our magnetic towel holder with strong magnetic backing is renter friendly that requires no drilling or glue. The magnetic paper towel rack can be easily attach to metal surface and holds up to 6lbs. Great for hanging small kitchen gadgets like paper roll, towels, brush, kitchen utensils, spatulas, etc.
Space Saving Wall Mount Paper Towel Holder: The hand towel holder for bathroom can be installed horizontally or vertically on metal surfaces such as refrigerator, microwave, washing machine(NOT for stainless steel or nonmagnetic surfaces). This wall paper towel holder will not take counter space like paper towel holder stand or paper towel holder countertop, effectively saves pace on kitchen countertop, side shelf or cabinet and keeps paper towels within arm's reach for quick usage.
Upgraded Integrated Design Instead of Welding: Different from wall-mounted under cabinet paper towel holder that easily breaks off on flimsy welding rod connections or comes off due to weak adhesive, our paper towel holder for wall has a one-piece “L” shape towel bar and a screwed base ensuring the bathroom hand towel holder heavy duty and never break in parts. Perfect household essentials, new home essentials, apartment essentials and small home essentials for pantry organizers and storage.
Fit Most Size Paper Towels Rolls: The paper towel holder for large rolls measures 12”(L) x 2.75”(H) so it has enough space for paper rolls with size up to 11”x2.7”. The toilet roll holder is suitable for most household paper towel rolls, even heavy paper towels can be rotated and taken out easily. NOTE: Before purchasing the towel racks for bathroom, make sure your paper rolls are not longer than 11” and not thicker than 2.75”.
Heavy Duty and Stylish: The wall mounted paper towel holder is made of high quality carbon steel with powder coating for both good looking and long-lasting use, sturdy and supports up to 6lbs. The matt black finish allows the black paper towel holder match modern kitchen decor and accessories home styles perfectly. Great alternative to wall mounted towel rack, wooden paper towel holders, wood towel hanger, napkin holder, paper roll dispenser, over the door towel rack, towel ring.
Anti-Stopping Design: The curved hook on the end of the magnetic wall mounted paper towel roll holder prevents the paper rolls from slipping off when pulling the paper towels, The unique L-shape design of the paper towel holder under cabinet no drilling also makes it easy to put the paper towel roll on/off when replacing a new roll. Great toilet paper holders for bathroom organizers and storage, home improvement, kitchen wall decor, apartment decor and kitchen storage rv accessories for inside.
Easy Installation and No Scratches: The under counter paper towel holder for kitchen comes with 1 mounting tool and 3 screws (1 extra) . No need to drill holes or wait 24 hours like other stick-on paper towel holders, just screw the hanging bar to the base and kitchen paper towels holder is ready to use on iron surfaces. The screws on the backing are recessed in the base so they will not scratch the kitchen applicants surfaces, making it great home accessories and home essentials for new home.
Versatile Magnet Towel Paper Holder: Under cabinet towel holder with super strong magnet can be attached on many home stuff like stove, oven, metal cabinet, grill, tool box, sink, dishwasher, washing machine, metal shelves, filing cabinets that have a metal surface. This paper towel holder counertop also can be used to hang and display various types of headwear,such as baseball caps, hats,cowboy hats,scarves, necklaces, key chains, hairbands, and other small items
Material: Metal
Color: Black
Brand: Seropy
Mounting Type: Refrigerator, Microwave, Washing machine
Item Weight: 1.5 pounds
Product Dimensions: 12"L x 2.75"W
Size: 1 Pack
Number of Items: 1
Unit Count: 1 Count
Number of Packs: 1
Number of Items: 1
Number of Packs: 1
Item Type Name: MPTH-B
Material Type: Metal
Color: Black
Mounting Type: Refrigerator, Microwave, Washing machine
Shape: L-shape
Item Weight: 1.5 pounds
Item Dimensions L x W: 12"L x 2.75"W
Size: 1 Pack
Frequently Asked Questions
Will the magnet hold on a metal RV or camper interior surface while driving on rough roads?
Yes, the strong magnet is rated to hold up to 6 pounds and the recessed backing keeps the holder seated flush even over bumps and vibration. Many full-time RVers use it as their primary paper towel mount specifically because it does not shift on rough terrain.
Can I use this outside on a patio fridge or outdoor kitchen without it rusting?
The carbon steel bar is finished with a powder coat that resists moisture and corrosion far better than painted or plated steel. For fully exposed outdoor use, bring it inside during heavy rain, but it handles patio and covered outdoor kitchen conditions with no issue.
Is this portable enough to take camping and bring home again?
It weighs only a few ounces and detaches instantly from any metal surface, so it travels easily in an RV cabinet, camper drawer, or even a car trunk. There is nothing to uninstall, no residue to clean, and no tools required to set it up at your next stop.
Will the powder-coated finish hold up to humidity in a camper bathroom or marine environment?
The powder coat is designed to handle everyday humidity and condensation found in campers and RVs, including bathroom environments with steam. It will not peel or flake under normal use, though it should be dried off if it gets soaked.
Does the magnetic mount work on a stainless steel RV fridge?
Stainless steel fridges, including most RV models, are not magnetic because the steel is mixed with nickel and chromium. The holder works on the powder-coated metal panels, toolboxes, filing cabinets, and any true ferrous metal surface in your camper or motorhome.
I have a tiny campervan galley, will this free up enough space to matter?
In a true galley, every inch of counter is prep space, so removing a standing paper towel holder is genuinely game-changing. Mounting it vertically on a metal cabinet side or under an overhead bin reclaims the entire counter footprint.
Can I attach it to my outdoor grill cart or patio bar if it has a metal frame?
Yes, any ferrous metal frame will hold the magnet, including powder-coated steel grill carts, metal patio bars, and storage cabinets. This is a popular setup for outdoor entertaining because paper towels end up exactly where the mess happens.
Will the magnet lose strength in cold weather during winter camping?
Permanent magnets do experience a small reduction in strength in extreme cold, but household and outdoor temperatures will not affect the hold meaningfully. As long as the surface is clean and ferrous, it will stay put through normal winter camping conditions.
Is the holder durable enough for a workbench or garage setting where it might get bumped?
The one-piece carbon steel construction with a powder-coated finish is built to handle garage and workshop conditions including occasional bumps from tools or equipment. The recessed backing screws mean there is nothing protruding to catch or chip.
Can I use it on a metal cooler or ice chest during a tailgate or picnic?
Yes, as long as the cooler has a ferrous metal shell, the magnet will attach and give you a clean paper towel station right at the food. It is one of the most popular uses for tailgating, beach days, and backyard cookouts.
How does this compare to a suction-cup or clamp-style outdoor paper towel holder?
Suction cups fail on textured surfaces and lose grip in heat or humidity, while clamps require a specific edge thickness and can scratch surfaces. A magnetic mount is faster, stronger, and surface-friendly, which is why it has become the go-to for outdoor and RV use.
I already have adhesive hooks in my RV, why would I switch?
Adhesive hooks weaken dramatically in RV temperature swings, leave residue, and can damage interior panels when removed. A magnetic mount survives road vibration, climate changes, and repositioning without ever touching the surface with adhesive.
Will the holder fly off if I am driving at highway speeds?
No, the magnetic hold is significantly stronger than the wind or vibration forces inside a moving vehicle. It will remain firmly in place even on long highway drives, and many users report it has never shifted after years of full-time RV living.
How do I install the magnetic paper towel holder on my fridge?
Assembly takes about one minute: slide the L-shape bar onto the magnetic base using the included screws and tool, then place the assembled unit against any clean ferrous metal surface. The magnet will hold immediately with no drilling, no adhesive, and no surface preparation needed.
Can the holder be mounted vertically as well as horizontally?
Yes, the L-shape is symmetrical and works in both orientations, so you can mount it vertically on the side of a fridge or horizontally under a metal cabinet. The roll dispenses cleanly in either direction thanks to the curved end hook that prevents slippage.
How do I clean the powder-coated finish without damaging it?
Wipe the holder with a soft damp cloth and a mild dish soap, then dry it immediately to prevent water spots. Avoid abrasive scrubbers, bleach, or harsh chemical cleaners, which can dull or damage the powder coat over time.
Will the magnet work on my stainless steel refrigerator?
Standard stainless steel is not magnetic because it contains nickel and chromium mixed into the steel, so most true stainless fridges will not hold this product. The magnet works on powder-coated or painted metal panels, including many black stainless, white, and colored appliances, plus any ferrous metal surface like a microwave, toolbox, filing cabinet, or washer.
What size paper towel rolls fit in this holder?
The 12-inch bar accommodates standard paper towel rolls up to 11 inches long and 2.75 inches thick, which covers nearly every brand on the market including full-size, mega, and select-a-size rolls. Larger commercial or industrial rolls over 11 inches will not fit.
What is included in the box, and do I need to buy anything separately?
The box includes the L-shape carbon steel bar, the magnetic base, three screws (one is a spare), and the small mounting tool required for assembly. No additional hardware, adhesives, or tools are needed, and the product is ready to use right out of the package.
Is the magnet strong enough to hold a full roll without slipping?
Yes, the magnetic base is rated to support up to 6 pounds, which is more than double the weight of a full standard paper towel roll. The recessed backing distributes the load evenly so the magnet does not creep, slide, or lose grip during normal daily tearing.
Will the magnet scratch or damage my fridge or appliance finish?
The backing features recessed screws that sit flush with the magnet, so nothing protrudes to contact or scratch the appliance surface. As long as you place it on a clean, dry surface, it will not leave marks, residue, or scuffs when removed.
How is a magnetic paper towel holder different from a wall-mounted or countertop paper towel holder?
Wall-mounted holders require drilling permanent holes and cannot move with you, while countertop holders consume valuable surface area. A magnetic holder attaches instantly to any ferrous metal surface with zero installation, zero damage, and full repositionability, making it the preferred option for renters, RV owners, and anyone who values flexibility.
