WOBANE Motion Activated Tape Light – Effortless Ambient Glow for Simple, Intentional Home Design
WOBANE Motion Activated Tape Light – Effortless Ambient Glow for Simple, Intentional Home Design
Couldn't load pickup availability
Why you'll love it
- Motion sensor with day/night modes means no fumbling for switches in the dark—safer for nighttime bathroom trips and stair navigation
- Three control modes (motion, dusk-to-dawn, manual remote) let one strip serve as night light, utility light, and accent light
- Dimmable 3000K warm white creates a cozy, sleep-friendly atmosphere without the harsh blue of cool LEDs
- 12V DC low-voltage operation stays cool to the touch, safe around kids, pets, and bedding
- Peel-and-stick flexible strip installs in minutes with no tools, wiring, or electrician—ideal for renters
- Two length options (16.4ft and 32.8ft) fit both small accent projects and whole-room runs
- Works well as main kitchen lighting — bright enough to serve as primary light source, not just accent
- Able to program one remote to control two separate LED light strip sets
- 'Warm white' 3000K option is appealing for a more inviting look
- Great for someone who previously tried 'smart' RGB strips and found them lacking in true warm white
- Adhesive works well on smooth to semi-smooth surfaces; prepping with rubbing alcohol improved adhesion
- Cheaper alternative to battery-powered lights — no ongoing battery cost
- Wobane customer service followed up after a negative review and sent a full replacement set plus refund
- Can connect multiple packs to the same remote for whole-house control
- Strip lays flat after being unrolled overnight without needing mounting tape
Perfect for
- Motion-activated night lighting to safely navigate bedroom, hallway, or stairs without turning on overhead lights
- Under-cabinet kitchen task lighting that turns on automatically when hands are full
- Dusk-to-dawn ambient lighting in closets and pantries without needing to flip a switch
- Cozy warm-white accent lighting behind the headboard or under the bed frame for bedroom mood
- Adhesive shelf and display lighting for showcasing décor or improving visibility in dim corners
- Lighting a pantry by wiring 12VDC directly from a nearby source and operating from a door switch
- Indirect lighting by adhering strip to the top of a beam in a dining room
- Backlighting a TV (specifically an old plasma) that needs RF remote and 110V outlet (not USB)
- Pairing multiple Wobane kits so a single remote controls all of them
- Using with a covered/aluminum channel for a clean under-cabinet look
- Lighting a glass display case from underneath
- Modifying the strip to be hardwired without AC outlet
- Adding ambient lighting to a Motorcoach interior to preserve house batteries
- Looping the entire length around a 6-foot cabinet run rather than cutting the strip
Product Information
Motion Sensor Strip Light:In motion sensor mode,it lights up as soon as it detects motion within 10 ft,and automatically turns off if no motion is detected.Meanwhile,It has 2 Sensing Modes,day mode and night mode.Day mode-motion detected in any condition,Night mode-motion detected only in dark Dusk to Dawn light:In only light sensor mode,It works as a night light. When the surrounding environment is bright,the light is automatically turned off.When it is dark,the strip light is automatically turned on Remote Control Strip Light:In manual mode,you can set various modes with the IR remote,such as dynamic mode and timer shutdown.All sensors are turned off at this mode.But brightness adjustment can be used in any mode Soft Warm Lighting:With 300 LEDs and 3000 K color temperature,creating a cosy atmosphere, just stick on anywhere,Such as:bed, kitchen cabinet,kitchen island,shelf,closet,stairs,RV,above the counter,etc All necessary parts are included:This LED strip kit contains 16.4 ft flexible strip light,IR remote controller,led controller,12 W ETL adapter, strip connector,3 pcs cable holder.The working voltage is DC 12 V,extremely Low voltage and heat
Features & Specs Indoor Outdoor Usage Indoor Additional Features Corded, Motion sensor Light, Or Only Dusk to Dawn Light, Remote Controlled, The trigger mode of automatic mode can be selected Light Source Type LED Power Source AC to DC adapter Light Color Warm White Color Temperature 3000 Kelvin Controller Type Remote Control Connectivity Protocol Bluetooth Voltage 12 Volts (AC) Wattage 12 watts Control Method Remote Water Resistance Level Not Water Resistant Number of Batteries 1 Lithium Metal batteries required. (included) Style Color Warm White Theme Indoor Occasion Christmas Product Style Modern Seasons All Seasons Measurements Number of Light Sources 300 Item Weight 150 Grams Number of Items 1 Item Dimensions 3.15 x 1.18 x 3.94 inches
Frequently Asked Questions
Can I install this without drilling holes in my rental apartment?
Yes. The strip uses a peel-and-stick adhesive backing, so installation requires no screws, nails, or drilling — perfect for renters and lease-protected spaces.
Does the strip leave visible hardware that would clutter a clean space?
No. The strip itself is nearly invisible and the included cable holders are small and clear, so the look stays clean and uncluttered.
Can I cut the strip to fit a short closet run without leftover clutter?
Yes. The strip can be cut to length at the marked points, and the included connector lets you use the remaining piece elsewhere instead of wasting it.
Will the motion sensor keep my entryway looking simple and switch-free?
Yes. With the motion or dusk-to-dawn mode, you can remove a wall switch from your mental list entirely — the strip turns on and off on its own.
Is one remote enough to control multiple strips in a minimalist setup?
Yes. You can pair multiple WOBANE kits to a single remote, keeping your walls and surfaces free of extra controllers and accessories.
Can I hide the adapter so it doesn't ruin the look of a clean shelf?
Yes. The small 12V adapter fits behind furniture, inside cabinets, or in cable management boxes so it stays out of sight.
Does the warm white tone fit a neutral, restrained color palette?
Yes. 3000K warm white complements whites, beiges, grays, and natural wood tones commonly used in minimalist interiors.
How does this compare to a hardwired under-cabinet light for a minimalist kitchen?
Hardwired fixtures require an electrician and holes in the wall, while this strip provides a similar clean under-cabinet look with zero permanent modification.
Will I need extra tools or accessories to install it cleanly?
No. Everything you need — strip, adhesive, cable holders, and connector — is in the box, so you avoid a drawer full of mounting hardware.
Is this strip visually noticeable on a white ceiling or wall?
The strip is thin and flexible, and once installed most people only notice the light it produces, not the strip itself.
Can I run it along a single 6-foot cabinet without extra wiring clutter?
Yes. The 16.4ft and 32.8ft lengths let you loop a long cabinet run, and the included connector joins the ends without adding visible splices.
How does this compare to a stack of battery puck lights for a clean look?
Battery pucks create dot-shaped hotspots and require frequent battery swaps, while this strip produces one continuous, even line of light from a single clean power source.
Will using one remote for many strips add clutter to my coffee table?
No. The remote is small enough to live in a drawer, on a wall hook, or in a single designated spot, keeping your surfaces intentionally sparse.
How do I install the WOBANE LED strip light?
Unroll the strip and let it lay flat overnight, wipe the mounting surface with rubbing alcohol, peel the adhesive backing, press the strip firmly into place, plug the 12V adapter into a 110V outlet, and pair the remote. No tools or wiring are required.
How do I switch between motion, dusk-to-dawn, and manual modes?
Use the included remote or the inline control box button to cycle through the three modes: motion-activated, automatic dusk-to-dawn, and manual on/off with dimming.
Can I cut the strip to fit a shorter space?
Yes. The strip has clearly marked cut points. Use the included connector to attach the cut end to the power lead or to use the leftover piece in another location.
Will this work with my old plasma TV that needs a 110V outlet, not USB?
Yes. The WOBANE kit includes a 110V plug-in adapter, making it compatible with TVs and locations where USB power is unavailable. The RF remote works without line of sight, which is ideal for TV backlighting.
Can I control two WOBANE kits with the same remote?
Yes. Multiple Wobane kits can be paired to a single remote, so you can operate all your strips together for whole-room or whole-house control.
What is included in the box?
You get the LED strip in your chosen length (16.4ft or 32.8ft), the 12V ETL-listed AC adapter, the IR or RF remote, cable holders, and a strip-to-wire connector. Everything needed for a basic install is included.
Is the strip safe to leave plugged in continuously?
Yes. The included ETL-listed 12V adapter is rated for continuous indoor use, and the LED strip itself runs cool with low heat output.
Will the adhesive fall off in a hot kitchen or RV?
On clean, smooth surfaces the adhesive holds well. For high-heat or textured surfaces, prepping with rubbing alcohol and adding a few extra adhesive clips is recommended for long-term hold.
What is the difference between this LED strip and a battery-powered puck light?
Battery puck lights produce a small circle of light, require ongoing battery replacement, and dim as batteries drain. The WOBANE strip produces continuous, even warm white light along its full length, has no batteries to replace, and connects to a reliable 12V DC power source for consistent brightness.
